|
楼主 |
发表于 2013-11-30 11:20:07
|
显示全部楼层
MDK显示的信息如下:
JLink info:
------------
DLL: V4.78j, compiled Nov 22 2013 20:08:33
Firmware: J-Link ARM-OB STM32 compiled Aug 22 2012 19:52:04
Hardware: V7.00
Feature(s) : RDI,FlashDL,FlashBP,JFlash,GDBFull
* JLink Info: Found SWD-DP with ID 0x2BA01477
* JLink Info: Found SWD-DP with ID 0x2BA01477
* JLink Info: Found Cortex-M4 r0p1, Little endian.
* JLink Info: FPUnit: 6 code (BP) slots and 2 literal slots
* JLink Info: TPIU fitted.
* JLink Info: ETM fitted.
ROMTableAddr = 0xE00FF003
Error: Flash Erase failed - Target DLL has been cancelled
JLINK FLASH显示的信息如下:
Application log started
- J-Flash ARM V4.78j (J-Flash compiled Nov 22 2013 20:09:00)
- JLinkARM.dll V4.78j (DLL compiled Nov 22 2013 20:08:33)
Reading flash device list [C:\\Program Files (x86)\\SEGGER\\JLinkARM_V478j\\ETC\\JFlash\\Flash.csv] ...
- List of flash devices read successfully (2167 Devices)
Reading MCU device list [C:\\Program Files (x86)\\SEGGER\\JLinkARM_V478j\\ETC\\JFlash\\MCU.csv] ...
- List of MCU devices read successfully (3207 Devices)
Opening project file [C:\\Program Files (x86)\\SEGGER\\JLinkARM_V440d\\Default.jflash] ...
- Project opened successfully
Connecting ...
- Connecting via USB to J-Link device 0
- J-Link firmware: V1.20 (J-Link ARM-OB STM32 compiled Aug 22 2012 19:52:04)
- JTAG speed: 2000 kHz (Auto)
- Initializing CPU core (Init sequence) ...
- Initialized successfully
- JTAG speed: 2000 kHz (Auto)
- Connected successfully
Erasing chip ...
- Erasing 12 sectors, 1 range, 0x8000000 - 0x80FFFFF
- ERROR: RAM check failed @ address 0x20000000.
- ERROR: Write: 0x03020100 07060504
- ERROR: Read: 0xAAAAAAAA AAAAAAAA
- ERROR: (0 bytes of RAM have been checked successfully)
- ERROR: Failed to erase chip
Disconnecting ...
- ERROR: Could not start CPU core. (ErrorCode: -1) |
|