|
本帖最后由 taotieren 于 2021-4-13 23:48 编辑
1. 用 lutris 环境搭建的 wine 环境
使用的是 h7-tool v2.0.0
字体使用的是 阿里巴巴普惠体,
如果显示字体为方框,要么安装 阿里巴巴普惠体,要么修改 wine 注册表里面的 字体链接名称。
下面注册表使用的是 文泉译微黑字体,根据自己系统字体不同进行相应的字体系统链接修改,注意:这里的字体名称要使用 Linux 系统的字体名称,
- REGEDIT4
- [HKEY_LOCAL_MACHINE\Software\Microsoft\Windows NT\CurrentVersion\FontLink\SystemLink]
- "Lucida Sans Unicode"="wqy-microhei.ttc"
- "Microsoft Sans Serif"="wqy-microhei.ttc"
- "MS Sans Serif"="wqy-microhei.ttc"
- "Tahoma"="wqy-microhei.ttc"
- "Tahoma Bold"="wqy-microhei.ttc"
- "SimSun"="wqy-microhei.ttc"
- "Arial"="wqy-microhei.ttc"
- "Arial Black"="wqy-microhei.ttc"
复制代码
2. H7-tool wine 环境:H7-tool.7z
H7-tool.7z (259.18MB)
注意一定要用 7z 格式,因为一些系统链接方式,使用其他压缩格式可能会丢失。
linux 下解压 7z 格式,需要通过系统软件仓库安装 7z 软件包。
最好是配合 lutris 运行
使用 lutris 可以创建桌面快捷方式相比 其他 wine 环境要方便很多
3. 使用 Segger 的 JlinkSofowarePakeage Linux 版本的工具调试 H7-tool
可以到 Segger 官网下载 >= v7.0 版本:https://www.segger.com/downloads ... ndDocumentationPack
Segger 现在重写 Jlink 工具,支持 Windows Linux MacOS ARM 等平台。
Jlink v7 版本支持 CMSIS-DAP 调试
配置 H7 的 udev 规则。在 /etc/udev/rule.d/ 下创建 99-h7-tool.rules
99-h7-tool.rules (0.81KB)
- sudo cat > /etc/udev/rule.d/99-h7-tool.rules << EOF
- # Copy this file to /etc/udev/rules.d/
- # If rules fail to reload automatically, you can refresh udev rules
- # with the command "udevadm control --reload"
-
- # This rules are based on the udev rules from the OpenOCD project, with unsupported probes removed.
- # See http://openocd.org/ for more details.
- #
- # This file is available under the GNU General Public License v2.0
-
- ACTION!="add|change", GOTO="h7_tool_rules_end"
-
- SUBSYSTEM=="gpio", MODE="0660", GROUP="plugdev", TAG+="uaccess"
-
- SUBSYSTEM!="usb|tty|hidraw", GOTO="h7_tool_rules_end"
-
- # Please keep this list sorted by VID:PID
-
- # H7-tool
- ATTRS{idVendor}=="C251", ATTRS{idProduct}=="F00A", MODE="666", GROUP="plugdev", TAG+="uaccess"
-
- # CMSIS-DAP compatible adapters
- ATTRS{product}=="*CMSIS-DAP*", MODE="666", GROUP="plugdev", TAG+="uaccess"
-
- LABEL="h7_tool_rules_end"
复制代码
复制上面的代码可以直接创建 99-h7-tool.rules 刷新 udev 信息
- sudo udevadm control --reload
复制代码
运行 JLinkExe 验证是否能和 H7-tool 通信,
至此,Linux 下使用 H7-tool 和 CMSIS-DAP 调试完成。
csdn上也可以查看
https://blog.csdn.net/taotieren/article/details/115584302
|
评分
-
查看全部评分
|