|
|
路径：STM32Cube_FW_H7_V1.4.0\Projects\STM32H745I-DISCO\Demonstrations\PC_Software
@par Demo Description
This project describe a Graphical Unit Interface made using C#, able to communicate with STM32H7.
The GUI is composed of 4 parts :
1. Communication Part
In this part, the user have to select the serial port in the computer is connected to the MCU,
also he have to set the bauld rate of the UART communication to 115200 bit/s. */
2. Oscilloscope Settings
In this part , the user have to selest the conversion frequency [Auto or 500 Samples/S ==> 16 M Samples/S].
4. Oscilloscope Control
In this part, there is 3 buttons porting the action to start,stop or close the oscilloscope .
* <h3><center>© COPYRIGHT STMicroelectronics</center></h3>
*/
|
|
发表于 2019-4-26 11:58:39
楼主
